NYNY LASH · LASH EDUCATION
How to Use Sticky Dots & Sticky Strips
Turn your favorite lashes into
easy-to-apply press-on lashes!
Our self-adhesive Sticky Dots and
Sticky Strips make lash application
simple without needing additional
lash glue. Follow our tutorials
to create your perfect lash look!
200 Dots
Per Sticky Dots pack
10 Strips
Per Sticky Strips pack
Press-On
No additional glue required
01 / Before you begin
Get Ready for Application
Proper preparation helps the adhesive
stick securely and keeps your lashes
looking their best.
Before Applying Your Lashes
-
Start with clean lashes.
Remove makeup, excess oil, and
skincare residue from your
natural lashes and eye area.
-
Make sure lashes are dry.
Moisture and oil can reduce
the adhesive's ability to stick.
-
Use clean tools.
Keep your lash tweezers,
applicators, and fingers clean
to avoid contaminating adhesive.
-
Avoid touching the adhesive.
The sticky surface should remain
clean so it can properly
attach to your lashes.
-
Skip mascara.
Additional mascara isn't
necessary and may leave
residue on the lash fibers.
02 / Individual lash clusters
How to Apply Sticky Dots
Sticky Dots are designed to
transform individual lash clusters
into self-adhesive press-on lashes.
Each pack contains
200 adhesive dots.
Follow these four steps for application.
01
Expose Your Sticky Dots
Begin by exposing only one
column of Sticky Dots at a time.
Leave the remaining adhesive
dots covered until you're
ready to use them.
This helps keep the
unused dots clean.
02
Press Your Lash onto the Dot
Pick up an individual
lash cluster using
clean lash tweezers.
Gently press the base
of the cluster directly
onto an exposed Sticky Dot.
Apply enough pressure for
the adhesive to attach
to the lash band.
03
Lift the Lash with Adhesive
Once the Sticky Dot
is attached to the cluster,
gently lift the lash
away from the adhesive sheet.
The Sticky Dot should
remain attached to
the lash band.
04
Apply & Press Your Lashes
Carefully position the
cluster against the base
of your natural lashes,
close to your lash line.
Gently press the cluster
and your natural lashes
together using a clean
applicator or fingertip.
Repeat until you've
completed your desired look!
Sticky Dots application guide
How to attach a lash to the adhesive dot
Important Application Tip:
Do not attempt to remove the
Sticky Dot first and then place
it onto the lash cluster.
Instead, press the lash band
directly onto the Sticky Dot
while it remains on the sheet.
Only trim the adhesive after
it has attached to the lash
if the dot is too long.
03 / Video tutorial
Watch the Sticky Dots Tutorial
Prefer watching an application
demonstration? Our tutorial
shows how to attach Sticky
Dots to individual lash clusters.
Watch more lash tutorials:
Follow
@nynylash0 on TikTok
for lash application demonstrations,
tips, and styling inspiration.
04 / Full lash strips
How to Apply Sticky Strips
Sticky Strips turn traditional
strip lashes into convenient
self-adhesive press-on lashes.
Each pack contains
10 adhesive strips.
Here's how to apply them!
01
Position Your Lash Strip
Hold your lash strip
by the band and carefully
align it with the Sticky
Strip while the adhesive
remains in its holder.
Press the lash band
against the adhesive.
02
Press the Lash into Place
Using the tool provided
with your Sticky Strips,
gently press the lash
band against the adhesive.
This helps the Sticky
Strip attach evenly
along the lash band.
03
Remove from the Holder
Once the adhesive is
securely attached to
your lash band, use
the corner of the
application tool
to gently lift the
lash and Sticky Strip
together from the holder.
04
Trim & Apply
If the Sticky Strip
extends beyond the
lash band, carefully
trim the excess
adhesive using
clean scissors.
Then apply the
lashes according to
the product instructions.
Enjoy your new look!
Black and transparent Sticky Strips
Sticky Strips application demonstration
Important:
Do not trim the Sticky Strip
before attaching it to
your lash band. Attach the
adhesive first, then trim
away any excess.
Always keep adhesive away
from your eyes and waterline.
05 / Lash care
Tips for Longer-Lasting Wear
Keep your lashes looking beautiful
and help preserve the adhesive
with these simple care tips.
Avoid Heavy Oils
Oil-based cleansers,
moisturizers, and
skincare products can
weaken the adhesive.
Avoid applying these
products directly around
your lash application area.
Skip the Mascara
No additional mascara
is needed! Our lashes
are designed to provide
length and volume.
Avoiding mascara helps
keep the clusters and
strips free of buildup.
Water-Resistant, Not Waterproof
Our self-adhesive lash
method can tolerate
some light moisture,
but prolonged water
exposure may weaken
the adhesive.
Avoid soaking your lashes.
Refresh Your Adhesive
If your lashes are
still in good condition
but the adhesive is
no longer sticky,
remove the old adhesive
and apply fresh
Sticky Dots or Strips
as appropriate.
06 / Removal & reuse
How to Remove & Reuse Your Lashes
How do I safely remove my lashes?
When you're ready to
remove your lashes,
gently loosen the
adhesive and carefully
lift them away without
pulling your natural lashes.
Sticky Dot lashes may
release with gentle removal.
If the adhesive resists,
use a remover suitable
for the adhesive and
eye area rather than
forcing the lashes off.
If you applied your
lashes with additional
Bond & Seal or
Kitty Milk Lash Glue,
follow the appropriate
adhesive removal
instructions instead.
Remember:
Never forcefully pull
off lashes that are
still securely attached.
Stop if you feel pain,
tugging, or irritation.
How many times can I reuse my Sticky Dot lashes?
Sticky Dots are designed
to turn ordinary lash
clusters into pre-glued
lashes that can typically
be reused for up to
3 separate wears.
Actual reusability
depends on how the
clusters are applied,
removed, cleaned,
and stored.
Once the adhesive
loses its stickiness,
you can refresh
suitable lash clusters
with new Sticky Dots.
How long do Sticky Strips last?
Our existing Sticky Strips
guide describes wear of
up to 3 weeks.
Actual wear time varies
depending on the adhesive,
application, daily activities,
and lash care.
This is not a guarantee
of continuous wear.
Remove lashes if they
begin lifting, feel
uncomfortable, or cause
irritation, and maintain
proper lash hygiene.
Can I reuse lashes after the adhesive loses its grip?
Yes! If the lash
fibers and bands
are still clean
and in good condition,
you may be able
to reuse them.
Remove the old
adhesive carefully
without damaging
the lash band,
then attach a new
Sticky Dot or
Sticky Strip.
Compatible lash clusters
may also be applied using
our Bond & Seal
or Kitty Milk Lash Glue,
following the respective
product instructions.
What's the best way to store used lashes?
Store reusable lashes
in a clean, dry
lash tray or case.
Avoid placing dirty
or wet lashes back
into their packaging.
Gently clean lashes
as appropriate for
the lash type and
allow them to
fully dry.
Do not reuse lashes
if they become damaged,
excessively dirty,
or cannot be cleaned safely.
07 / Common questions
Sticky Dots & Strips FAQs
What's the difference between Sticky Dots and Sticky Strips?
Sticky Dots
are small individual
adhesive pieces designed
for separate lash clusters.
Each pack includes
200 dots.
Sticky Strips
are longer adhesive
pieces designed for
full strip lashes.
Each pack includes
10 strips.
Quick guide:
Use Sticky Dots for
individual lash clusters
and Sticky Strips
for full lash strips.
Do I need lash glue when using these adhesives?
No! Sticky Dots and
Sticky Strips are
self-adhesive, so
additional lash glue
is not required for
their intended
press-on application.
Simply attach the
adhesive to the
lash band as directed,
then apply your lashes.
Can I trim Sticky Dots or Sticky Strips?
Yes! If the adhesive
extends beyond
your lash band,
you may carefully
trim the excess
after attaching it.
Always attach
the adhesive first,
then trim.
Do not trim adhesive
before attaching it
to the lash band.
Why isn't my adhesive sticking?
Several things may
affect adhesive grip,
including:
-
Excess oil or
skincare residue
-
Wet or damp
natural lashes
-
Touching the adhesive
with fingers or tools
-
Old adhesive
that has lost
its stickiness
-
Incorrect placement
on the lash band
Start with clean,
dry lashes and
avoid touching
the exposed adhesive.
If the adhesive is
contaminated or no
longer tacky, replace
it with a fresh
Sticky Dot or Strip.
Are Sticky Dots and Strips waterproof?
They are
water-resistant,
not waterproof.
Light exposure to
moisture may be tolerated,
but prolonged soaking
can weaken the adhesive
and shorten wear time.
Avoid swimming,
extended water exposure,
and rubbing your
eyes while wearing
self-adhesive lashes.
What should I do if my eyes become irritated?
If you experience
redness, discomfort,
swelling, burning,
or irritation,
discontinue use
and gently remove
the lashes.
Do not apply lashes
to irritated or
infected eyes.
Seek medical advice
for ongoing symptoms
or eye pain.
READY TO TRANSFORM YOUR LASHES?
Shop Sticky Dots & Lash Essentials
Turn your favorite lash clusters
and strip lashes into convenient
press-on styles!
Shop our Sticky Dots or explore
our collection of individual
and strip lashes to create
your perfect look.
NyNy Lash · Lash Education ·
Pre-Glued Lash Tutorial
·
FAQs
·
Contact Us
